EVP Selection Set Functions
EVP Selection Set Functions
Here are listed the various functions that are available via EVP selection sets.
The actual code for these functions is contained in the routine PSSEVP, which is
part of the DALSEL library.
- SLECTALL
- Selects all events.
- D1EWNDOW
- Permits a selection on D1 energy.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- D2EWNDOW
- Permits a selection on D2 energy.
- Parameter 1 - D2E minimum
- Parameter 2 - D2E maximum
- ETOTWNDW
- Permits a selection on total energy.
- Parameter 1 - E-total minimum
- Parameter 2 - E-total maximum
- PHIBARWN
- Permits a selection on phibar
- Parameter 1 - phibar minimum (radians)
- Parameter 2 - phibar maximum (radians)
- CORTOFWN
- Permits a selection on corrected ToF
- Parameter 1 - ToF minimum
- Parameter 2 - ToF maximum
- CORPSDWN
- Permits a selection on corrected PSD
- Parameter 1 - PSD minimum
- Parameter 2 - PSD maximum
- EVENTLOC
- Selects events within X-Y (radial) distance limits from module center ans within
a selected lambda range. (Lambda is related to depth within the module by some
as yet clearly defined relation.)
- Parameter 1 - Lower limit of radial distance in D1
- Parameter 2 - Upper limit of radial distance in D1
- Parameter 3 - Lower limit on lambda in D1
- Parameter 4 - Upper limit on lambda in D1
- Parameter 5 - Lower limit of radial distance in D2
- Parameter 6 - Upper limit of radial distance in D2
- Parameter 7 - Lower limit on lambda in D2
- Parameter 8 - Upper limit on lambda in D2
- ARMWNDOW
- Permits a selection on ARM value for each event, based on some user-specified
source position.
- Parameter 1 - X coordinate of the source.
- Parameter 2 - Y coordinate of the source.
- Parameter 3 - Z coordinate of the source.
- Parameter 4 - Lower ARM limit (degrees)
- Parameter 5 - Upper ARM limit (degrees)
- PRCPARMS
- Permits a selection on
- Parameter 1 -
- Parameter 2 -
- MINITELE
- Permits a selection on user-specified module selections.
- Parameter 1 - D1 module selections for D1-1 through D1-7 (7-digit string)
- Parameter 2 - D2 module selections for D2-1 through D2-7 (7-digit string)
- Parameter 3 - D2 module selections for D2-8 through D2-14 (7-digit string)
- TELESCOP
- Permits a selection on various telescope event parameters. Requires VETO = 0.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - REFLAG minimum (aka CPL - current processing level)
- VETOEVTS
- Permits a selection of veto events. If the single function parameter is
set to '1', then only events with veto > 0 are selected. If the single
funcion parmeter is set to '0', then only events with veto = 0 are
selected.
- Parameter 1 - Veto event flag
- VETOFLGS
- Permits a selection of events based on interactions in specific veto domes.
- Parameter 1 - Veto dome 1 acceptance flag
- Parameter 2 - Veto dome 2 acceptance flag
- Parameter 3 - Veto dome 3 acceptance flag
- Parameter 4 - Veto dome 4 acceptance flag
- HORZNANG
- Permits a selection on calculated earth horizon angle.
- Parameter 1 - Lower limit on Earth horizon angle (inclusive)
- Parameter 2 - Upper limit on Earth horizon angle (inclusive)
- TELESCP2
- Permits a selection on various telescope event parameters. Requires VETO = 0 and
REFLAG (aka CPL) >= 10.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - PSD minimum
- Parameter 8 - PSD maximum
- Parameter 9 - Phibar minimum
- Parameter 10 - Phibar maximum
- Parameter 11 - Zeta minimum (Earth horizon angle - phibar)
- Parameter 12 - Zeta maximum (Earth horizon angle - phibar)
- ROLSCOPE
- Permits a selection on various telescope event parameters. Requires VETO = 0 and
REFLAG (aka CPL) >= 10.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - PSD minimum
- Parameter 8 - PSD maximum
- Parameter 9 - Phibar minimum
- Parameter 10 - Phibar maximum
- Parameter 11 - Zeta minimum (Earth horizon angle - phibar)
- Parameter 12 - Zeta maximum (Earth horizon angle - phibar)
- Parameter 13 - Radius from center of D1
- Parameter 14 - Radius from center of D2
- TELESCP3
- Permits a selection on various telescope event parameters. Requires VETO = 0 and
REFLAG (aka CPL) >= 10.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - PSD minimum
- Parameter 8 - PSD maximum
- Parameter 9 - Phibar minimum
- Parameter 10 - Phibar maximum
- Parameter 11 - Zeta minimum (Earth horizon angle - phibar)
- Parameter 12 - Zeta maximum (Earth horizon angle - phibar)
- Parameter 13 - E-total minimum
- Parameter 14 - E-total maximum
- PHOTDRWN
- Permits a selection on D1 energy.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- TELESCP4
- Permits a selection on various telescope event parameters. Requires VETO = 0 and
REFLAG (aka CPL) >= 10.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - PSD minimum (dummy)
- Parameter 8 - PSD maximum (dummy)
- Parameter 9 - Phibar minimum
- Parameter 10 - Phibar maximum
- Parameter 11 - Zeta minimum (Earth horizon angle - phibar)
- Parameter 12 - Zeta maximum (Earth horizon angle - phibar)
- TELESCP5
- Permits a selection on various telescope event parameters. Requires VETO = 0.
- Parameter 1 - D1E minimum
- Parameter 2 - D1E maximum
- Parameter 3 - D2E minimum
- Parameter 4 - D2E maximum
- Parameter 5 - ToF maximum
- Parameter 6 - ToF maximum
- Parameter 7 - PSD minimum
- Parameter 8 - PSD maximum
- Parameter 9 - Phibar minimum
- Parameter 10 - Phibar maximum
- Parameter 11 - Zeta minimum (Earth horizon angle - phibar)
- Parameter 12 - Zeta maximum (Earth horizon angle - phibar)
- Parameter 13 - E-total minimum
- Parameter 14 - E-total maximum
- Parameter 15 - REFLAG minimum
- Parameter 16 - REFLAG maximum
Last Update: February 17, 1998
Dr. Mark McConnell
Space Science Center
Morse Hall, Rm 312
University of New Hampshire
Durham, NH 03824
Phone: (603) 862-2047
Fax: (603) 862-4685
Mark.McConnell@unh.edu